Automatic Clamping Wireless Charging Mount for Car Dashboard

Auto-Clamping Car Charger With 10W Wireless Charging Built In

You're fumbling with your phone mount whenever you drive. One hand on the wheel, one wrestling the holder, and it still isn't charging. Set it and drive for daily commutes, errands, or longer road trips without the fuss.

It uses motorized arms that open as the phone approaches and clamp shut to help hold it in place. Wireless charging supports 10W, 7.5W, or 5W depending on the device and adapter. Updated adhesive backing helps keep the mount fixed to the dash on many road surfaces.

A rubber clamp grips the phone firmly through sudden stops and bumps while driving. Built-in safety features include over-voltage, under-voltage, temperature control, surge protection, and short-circuit prevention. Charging is designed to stop automatically once the device reaches full charge.

These features work with Qi-enabled smartphones across a range of compatible models. Fast charging at 10W and 7.5W requires a QC 3.0 car charger, sold separately. The mount weighs 0.26 lbs and measures 3.94 × 1.97 × 1.57 in.

• AUTO CLAMPING ARMS: Motorized arms open automatically as the phone approaches and clamp shut for a hands-free hold.
  
  
• ONE HANDED OPERATION: Phone drops into the mount and locks in place without pressing, adjusting, or looking away from the road.
  
  
• WIRELESS FAST CHARGING: Delivers 10W, 7.5W, or 5W charging wirelessly depending on the connected device and input adapter.
  
  
• RUBBER CLAMP GRIP: Rubber lined arms hold the phone firmly against sudden stops, bumps, and uneven road surfaces.
  
  
• UPDATED ADHESIVE BACKING: Stronger adhesive help keeps the mount locked to the dash without slipping or shifting during drives.
  
  
• FIVE SAFETY PROTECTIONS: Covers over-voltage, under-voltage, temperature control, surge protection, and short-circuit prevention during every charge.
  
  
• AUTO STOP CHARGING: Charging cuts off automatically when the device reaches full so the battery stays within a safe range.
  
  
• BROAD DEVICE COMPATIBILITY: Works with all Qi-enabled smartphones and supports standard 5W charging for devices outside fast charge specs.

Product Specifications

• Type: Wireless Car Charger with Auto-Clamping Arms
• Charging Modes: 10W, 7.5W, 5W
• Compatibility: All Qi-Enabled Smartphones
• Fast Charge Input: QC 3.0 Car Charger Required (Not Included)
• Mount Size: 3.94 × 1.97 × 1.57 inches
• Weight: 0.26 lbs
• Grip: Rubber Clamp
• Mounting: Adhesive Backing
• Safety: Over-Voltage, Under-Voltage, Temperature Control, Surge, Short-Circuit Protection
• Auto Stop: Yes, Stops at Full Charge

What's Included

• 1 x Auto-Clamping Wireless Car Charger
• 1 x USB Charging Cable
• 1 x User Manual

Frequently Asked Questions

Do I need to do anything to get the arms to open and close?
No, the motorized arms are triggered automatically as your phone approaches the mount. They open on their own and clamp shut once the phone is in position, so there is no button to press or lever to operate while driving.

What car charger do I need to get 10W fast charging?
A QC 3.0 compatible car charger is required to reach the 10W and 7.5W fast charging speeds. This adapter is not included in the box, so you will need to source one separately if you do not already have one. Without it, the mount will still charge at the standard 5W rate.

Will the adhesive backing hold on a textured or curved dashboard?
The updated adhesive is designed for a stronger hold on standard dashboard surfaces. For best results, apply it to a clean, flat, and smooth section of the dash. Heavily textured or curved surfaces may reduce the adhesive contact area and holding strength over time.